GSM Module SIM800L
Specification
- Supply voltage: 3.8V – 4.2V
- Recommended supply voltage: 4.1V ( YOU CAN USE STEP DOWN MODULE TO GET THIS VOLT)
- Power consumption:
- sleep mode < 2.0mA
- idle mode < 7.0mA
- GSM transmission (avg): 350 mA
- GSM transmission (peek): 2000mA
- Module size: 25 x 23cm
- Interface: UART (max. 2.8V) and AT commands
- SIM card socket: microSIM (bottom side)
- Supported frequencies: Quad Band (850 / 950 / 1800 /1900 MHz)
- Antenna connector: IPX
- Status signaling: LED
- Working temperature range: -40 do + 85 ° C
you can use step-down module lm2596 with it and adjust the potentiometer to get 4.1volt
Serial Cable DB9 Male-Female RS232
SD card 32GB for Raspberry Class 10
CD4047 IC Monostable/Astable Multivibrator 4047
regulator 5 volt 7805
Prototyping Expansion Shield Module for Raspberry Pi
Strong Magnet neodymium magnet NdFeB
Fan 5v for Raspberry pi
ULN2003 Darlington Transistor array IC
LM317 Adjustable Voltage Regulator
Biggest size breadboard 4-units
Pin Header Male 40P 2.54mm 
















